Welcome, Guest
Username: Password: Secret Key Remember me

TOPIC: Weather Proofing - Clear Display Viewport

Weather Proofing - Clear Display Viewport 1 year 7 months ago #18022

  • hop
  • hop's Avatar
  • Offline
  • Platinum Boarder
  • Posts: 526
  • Thanks received: 46
Greets All!!

I am exploring (for a couple hours anyway) weatherproof enclosures for my server nodes that will be outside. One of the things that popped into my head is how my OLED display will fair exposed to the elements. Not well I would expect, and my goal was to carefully cut a rectangle that would expose the display only. So I considered replacing the cut away area with a piece of plexy or some other material, and rubber gasket/glue/whatever around the edges to seal it. I considered a piece of transparent material that would fit inside a recessed edge, but the material I am cutting, a used up and cleaned Old Spice deodorant container - LID actually is where I planned to place the display. The material is pretty thin.

I was wondering if anyone had any ideas for this (wink wink Jon). Or should I go with something premade? If so, where would I find something that had versatile dimensions for viewports I can use?

Thanks guys as always for your time! :)
Last Edit: 1 year 7 months ago by hop.
Time to create page: 0.213 seconds