Welcome, Guest
Username: Password: Secret Key Remember me
  • Page:
  • 1
  • 2

TOPIC: Acrylic Bolted Joints and Cemented Windows

Re: Acrylic Bolted Joints and Cemented Windows 7 years 4 months ago #10241

  • Jon Chandler
  • Jon Chandler's Avatar
  • Offline
  • Moderator
  • Posts: 365
  • Thanks received: 352
Digikey carries (some of) the PRD series from Proud Industries as I linked above. They don't seem to come tall enough for a 4x20 LCD.

The Mouser ones are from a company in Germany. The EA 017-9UKE model (which is in stock at Mouser) is designed for a 4x20 display but it appears to be only the bezel without a lens.

Re: Acrylic Bolted Joints and Cemented Windows 7 years 4 months ago #10290

  • Jon Chandler
  • Jon Chandler's Avatar
  • Offline
  • Moderator
  • Posts: 365
  • Thanks received: 352
The bezel from DH MicroSystems arrive today. It's exactly what I need.

It's a bezel frame and a non-glare lens. The opening is sized for the active area of a 4x20 LCD display. The blemish in the upper left corner is the peel-off film - it's not a defect in the lens.





The bezel overlaps the panel opening by about 0.125" on all sides which will cover a rough opening.

Nice product for the price.
Attachments:

Re: Acrylic Bolted Joints and Cemented Windows 7 years 4 months ago #10295

  • be80be
  • be80be's Avatar
  • Offline
  • Senior Boarder
  • Posts: 79
  • Thanks received: 90
I ordered a new LCD for a laptop I repaired and the peel-off film looked like the LCD was cut with a knife I almost sent the dang thing back.

Those are nice Jon looks like the same place you get the LCD would keep them.
  • Page:
  • 1
  • 2
Time to create page: 0.231 seconds