Welcome, Guest
Username: Password: Secret Key Remember me

TOPIC: Article ready for publishing

Re: Article ready for publishing 7 years 1 month ago #15650

  • majenko
  • majenko's Avatar
  • Offline
  • Fresh Boarder
  • Thanks received: 62
Article ID 449 is ready for publishing.

Yes, it's a shameless bit of self-promotion

Re: Article ready for publishing 7 years 1 month ago #10660

  • W4GNS
  • W4GNS's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 11
  • Thanks received: 43
Article ID 449 is ready for publishing.

Yes, it's a shameless bit of self-promotion


From my point of view, it's and "advertisement" not an article. But Graham approved it, and it's his forum, so all is well.

Re: Article ready for publishing 7 years 1 month ago #10661

  • majenko
  • majenko's Avatar
  • Offline
  • Fresh Boarder
  • Thanks received: 62
There's not much difference between an advert and a product announcement, and the product was made with input from this site, so

Re: Article ready for publishing 7 years 1 month ago #10662

  • Jon Chandler
  • Jon Chandler's Avatar
  • Offline
  • Moderator
  • Posts: 365
  • Thanks received: 352
No, actually, I approved it. It is an advertisement, but the board was also developed with input from Digital-DIY members so it's a bit of a community effort.

Majenko is a valued contributor here, so that weighs into the consideration. I believe he'll be publishing other articles that are more technical in nature.

As always, I'm but a humble servant here, so Graham may overrule my decision.

Re: Article ready for publishing 7 years 1 month ago #10668

Of course products developed with input from the DD community are welcome. For me; commercial agenda backed with creative/helpful intent is fine.

Re: Article ready for publishing 7 years 1 month ago #10664

  • majenko
  • majenko's Avatar
  • Offline
  • Fresh Boarder
  • Thanks received: 62
I've done another one.... Article 452. Ready for vetting & publishing.
Time to create page: 0.245 seconds